【设计说明】全幅印花。UV打印。
【材质说明】304不锈钢（容量1150-1180ml）
【配件构造】密封双饮囗盖（盖子不含双酚A） +不锈钢吸管+硅胶 +软毛刷
【产品性能】
优选材质：采用304不锈钢健康材质，真空、保温，双层防烫。
安全保护：杯盖高度密封不漏水，接触热水无异味。
超大容量：加大大容量，内壁精细抛光，美观，易清洗.。
便携放置：上宽下窄易放置，车内摇晃不易撒。
【适用情景】适用于车载便携、家居装饰、户外旅游，轻松畅饮，一杯多用，满足你的各种选择。
【洗涤说明】收到时，请用开水烫一下再使用，除去杯子在生产过程中产生的灰尘等。
【特别说明】此尺码数据因测量方法不同，误差在1cm内的属于正常现象。
备注：页面请标注清楚此款产品由于是异形建模无法保证建模的绝对准确，收到的实物在把手位置，图案接缝处会存在细微的差别；杯口处由于打印工装的模具差异会有极其细微的墨水溢出现象，相关问题不作为售后的理由。
温馨提示：
该图片展示效果仅供参考，最终效果以实物为准！由于生产批次、机器设备等客观因素原因，难以避免或将存在微小色差、位置及大小等误差，如遇以上问题均属于正常现象，将不予纳入售后处理范畴。
[Design Description] Full-color printing. UV printing.
[Material Description] 304 stainless steel (capacity 1150-1180ml)
[Accessory Construction] Sealed double drinking mouth cover (the lid does not contain bisphenol A) + stainless steel straw + silicone + soft brush
[Product Performance]
Preferred material: 304 stainless steel, healthy material, vacuum and insulation, double-layer anti-scald.
Safety protection: The cup lid is highly sealed and does not leak. It does not have any odor when in contact with hot water.
Extra-large capacity: Increased capacity, with finely polished inner walls, beautiful appearance, and easy cleaning.
Portable placement: Wide top and narrow bottom, easy to place. It is not likely to spill even when shaken in the car.
[Applicable Scenarios] Suitable for portable use in vehicles, home decoration, outdoor travel. Enjoy smooth drinking, multi-purpose use, and meet your various choices.
[Cleaning Instructions] Please use boiling water to scald the cup before use to remove dust and other substances produced during the production process.
[Special Note] The size data may vary due to different measurement methods. An error within 1cm is considered normal.
Note: Please clearly mark this product on the page as it is an irregularly shaped model and the modeling cannot be guaranteed to be absolutely accurate. The actual product received may have slight differences in the handle position and pattern seams; there may be extremely fine ink overflow at the cup opening due to the difference in printing tooling molds. Related issues will not be considered as reasons for after-sales service.
Cautionary Notice:
This image shows the effect for reference only. The final effect will be based on the actual product! Due to objective factors such as production batches and machine equipment, it is inevitable that there may be slight color differences, position and size errors, etc. If any of these issues occur, they are considered normal phenomena and will not be included in the after-sales processing scope.
您可能还喜欢
